Are you in search of the best plumbing schools in New York? Search no more; I got you covered. Many options are available today when deciding which program is best for you. You can attend a traditional brick-and-mortar school, or, thanks to the growth of online education, you can attend a school halfway across the country without leaving your house.
Many trade schools provide short-term programs that offer more career options.
The best plumbing schools in New York ranking is one of many tools developed by academic related to assist you in making an educated decision.
This article discusses the best plumbing schools in New York to help determine which is best for you.
See Also: 15 Best Plumbing Schools in Las Vegas
Table of Contents
Are there Plumbing Schools in New York?
There are a good number of plumbing schools in New York. These plumbing schools are:
- Alfred SUNY College of Technology
- Canton State University of New York
- Delhi State University of New York
- Erie Community College
- Monroe Community College
- New York City College of Technology
- New York University
- LaGuardia Community College
- Apex Technical School
- Berk Electrical and Trade School
- Nassau Boces
- QBI, The Training Institute, Inc.
How Does One Become a Plumber in New York?
The State of New York’s Department of Buildings outlines two options for obtaining journeyman plumber licensure.
Trainees in this field can complete a state-registered training program in New York and one year of work experience.
Another option is to work as an apprentice for at least five years under the direct supervision of a master plumber.
According to the New York State Department of Labor (NYSDOL), apprenticeship programs for plumbers require 10,000 hours of training, including paid on-the-job training and coursework at a trade school, community college, or vocational center.
Also, plumbing apprentices will receive a Certificate of Completion from the NYSDOL After completing a state-approved program and gaining the required work experience.
What are the Best Plumbing Schools in New York?
Below are the plumbing schools in New York:
#1 Alfred State University of New York College of Technology
This Alfred college offers plumbing instruction as part of the Associate in Occupational Studies in Air Conditioning and Heating Technology program.
Students learn the fundamentals of plumbing installation, which is required to construct commercial and residential structures.
Installing waste and sewage lines, potable water lines, and plumbing fixtures are all part of the process.
In addition, students learn about plumbing safety and trade history. Pipe fitting, wiring, blueprint reading, and duct system design are also topics covered in the degree program.
Alfred SUNY offers a direct transfer option for successful graduates of this program who want to continue their studies in a baccalaureate program in technology management.
#2 Canton State University of New York
This SUNY college in Canton, New York, offers certificate, associate, and bachelor’s degrees. The most common are associate degrees, which include business, engineering, health, construction, and law enforcement programs.
Students in the heating and plumbing service certificate program learn how to repair and maintain plumbing equipment, heaters, and boilers.
While the program focuses on home installation and maintenance, students also learn about installation and maintenance in commercial buildings.
This one-year program includes the study of heating and plumbing principles and practice, as well as applied college mathematics, blueprint reading, and other topics.
However, general education requirements must also be met to complete this degree program successfully.
#3 Delhi State University of New York
This SUNY school is located in Delhi, New York, at the foothills of the Catskill Mountains. This college offers a more significant number of associate degrees and several specialized technology-based certificates in addition to bachelor’s degrees.
The Associate of Occupational Science in Plumbing, Heating and Refrigeration program prepares students for future careers in these fields.
Enrollees can choose between two tracks; those interested in plumbing training can enroll in the plumbing, heating, and pipefitting advice track.
Also, plumbing codes, plumbing theory, plumbing blueprint drafting, and plumbing drainage are all covered in this track. Degree candidates may be able to gain hands-on experience through a project.
See Also: 15 Best Plumbing Schools in Los Angeles
#4 Erie Community College
Erie Community College in Buffalo is part of the State University of New York (SUNY) System, which includes colleges and universities across the state.
This 2-year college has over 12,000 students and offers certificate and degree programs in construction, biomedical sciences, computer and information systems, culinary arts, and law enforcement.
Plumbing training can be obtained through a one-year certificate program in residential, light, and commercial building trades.
Students in this program are trained to renovate and update existing structures. The 33-credit program includes two courses on plumbing systems and green plumbing.
The other topics covered in the course are blueprint reading, electrical systems, green building technology, and applied mathematics. Students also help with renovation projects.
#5 Monroe Community College
Monroe Community College in Rochester provides skilled trades apprenticeship training programs in various trades, including pipe fitting, sprinkler fitting, and plumbing.
Students will learn how to install valves and drains, create pipe drawings and detail sheets, and work with various types of piping in three plumbing courses.
Students will also be trained to install water systems, fixtures, and heaters. Each course meets twice a week and lasts approximately four months.
See Also: 15 Best Plumbing Schools in Houston
#6 New York City College of Technology
The New York City College of Technology, located in Brooklyn, offers approximately 65 degree and certificate programs and non-credit continuing education courses, including classes for homeowners and building maintenance personnel who want to learn basic plumbing skills.
Basic Plumbing Repairs in Housing offers essential training for house owners and building managers to evaluate and repair plumbing problems and efficiently communicate with plumbing contractors.
This course includes hands-on experience installing, maintaining, and repairing plumbing fixtures and an overview of New York City’s plumbing codes.
The Homeowner’s Guide to Basic Plumbing is available for those who want to learn how to solve simple home plumbing issues like clearing a clogged drain or repairing a toilet.
#7 New York University
This university in New York educates over 49,000 students in various subjects.
The University of Professional Studies offers continuing education courses and programs, including a certificate program in plumbing system design.
Also, graduates of this program receive the certificate after completing four classes in the recommended order.
See Also: 15+ Best Plumbing Schools in Texas
#8 LaGuardia Community College
The plumbing course offered by LaGuardia College’s Continuing Education Department includes extensive hands-on training.
In addition, students will receive OSHA 30-hour certification. The Construction Core and Plumbing Level 1 curriculum from the National Center for Construction Education & Research (NCCER) is used in the program.
Classes are held from 4:30 p.m. to 9:30 p.m. on Mondays, Wednesdays, and Thursdays.
Program Overview:
Plumbing 1 Certificate
Clock hours: 195 hours (39 sessions)
#9 Apex Technical School
Apex Technical School offers a plumbing program that gives students the skills they need to start a career as a plumber.
Hand and power tools, fittings, faucets, fixtures, and DWV piping and valves will be taught to students.
The program also includes pipefitting skills and socket and butt weld pipe fabrication. Training will take place in the classroom and at various off-site locations, where students will put theory into practice.
Program Overview:
Plumbing Certificate
Clock hours: 900
See Also: 15 Best Plumbing Schools in San Antonio
#10 Berk Electrical and Trade School
Plumbing maintenance program graduates will be prepared to assemble, install, and repair pipes, fixtures, and drainage systems per plumbing codes and specifications.
Students will learn in the classroom as well as through hands-on experience in a variety of real-world settings.
Additionally, classes meet for a total of 25 hours per week over four weeks. There are day, afternoon, and evening schedules available.
Day classes meet from 9:00 a.m. to 2:00 p.m., Monday through Friday. From 1:00 p.m. to 6:00 p.m., afternoon classes are held Monday through Friday. Evening classes are held from 5:00 p.m. to 10:00 p.m., Monday through Friday.
Program Overview:
Plumbing Maintenance
Clock hours: 100
#11 Nassau Boces
Nassau Boces trains adults to work in the plumbing industry. The Plumbing 1 program teaches the fundamental skills required for entry-level work as a plumber.
Students will learn how to use tools, adhere to safety standards, pipefitting skills, repair and replace materials and fixtures in residential homes, drainage trap principles, and applications, and know piping layouts in water supply, including drainage, waste, and ventilation systems.
Also, graduates can further their education by enrolling in the Plumbing II program. For two months, classes will be held on Tuesdays and Thursdays from 6:30 p.m. to 9:30 p.m.
Program Overview:
Plumbing I
Clock hours: 54
See Also: 15 Best Plumbing Schools in San Diego
#12 QBI, The Training Institute, Inc.
The Plumber’s Helper Training Program teaches students how to install, repair, and maintain commercial and residential plumbing systems and apply for a license and union membership.
The curriculum is intended to teach adults with no prior experience in the field how to prepare for entry-level positions.
Lastly, graduates will be prepared to advance in the field by building on the educational foundation provided by the program. Every seven weeks, new classes begin.
Program Overview:
Plumbing Helper Training Program
Clock hours: 630
Also Read- 15 Best Plumbing Schools in Michigan
How Long are Plumbing Schools in New York?
Plumber training is available in New York at 2-year public and 4-year public and private schools. A basic plumbing program for homeowners takes three hours to complete.
If you’re looking for professional training, an immersion course or certificate takes about four months to complete and prepares you for entry-level work.
Alternatively, a one-year certificate program designed for engineers could prepare you to design plumbing systems.
How Much are Plumbing Schools in New York?
Plumbers are educated in technical schools, community colleges, and apprenticeship programs that provide on-the-job training.
According to Education Portal, a one-year certificate program prepares students to install and repair plumbing systems. A two-year associate’s degree may also include coursework in pipefitting, basic electricity, pump system design, and essential heating.
This additional education can lead to advanced careers in plumbing, pipefitting, and related fields such as heating and gas technology.
The following are the typical costs of studying plumbing in New York:
- An online plumbing training program costs between $800 and $1,000.
- A plumbing certificate program costs between $1,250 and $3,000.
- A plumbing technology associate’s degree costs between $3,000 and $23,000.
- Plumbing apprenticeships range from $0 to $1,000 and last 4-5 years.
- Plumbing licenses in the state range from $75 to $300 and are valid for 1-2 years.
- Certification through the American Society of Plumbing Engineers[10] costs between $300 and $625, depending on membership and practical work experience.
- Additional plumbing training costs range from $500 to $10,000 and may include books, tools, uniforms, and living expenses.
Don’t Fail To Read-15 Best Plumbing Schools in Connecticut
How Much Do Plumbers Make in New York?
The average annual salary for a Plumber in New York is $54,093 as of September 6, 2022. If you need a quick salary calculator, that costs about $26.01 per hour. This is the equivalent of $1,040/week or $4,507/month.
While salaries can range from $93,458 to $27,327, the majority of Plumber salaries in New York currently range from $45,909 (25th percentile) to $66,677 (75th percentile), with top earners (90th percentile) earning $80,341.
However, the average salary for a Plumber varies greatly (up to $20,768), implying that there may be numerous opportunities for advancement and increased pay based on skill level, location, and years of experience.
Conclusion
All professional plumbers in New York State are required to obtain a license. Plumbers are licensed in two categories: journeyman plumbers and master plumbers.
Journeyman plumbers work for a master plumber to gain the experience and training required to apply for a master’s license.
Applicants for the Journeyman Plumber license must be at least 18 years old, physically fit to perform the work authorized by the registration, morally upright, and able to write and understand English.
However, a minimum of five years of full-time expertise or completion of a New York State-authorized training program with one-year knowledge in New York City is also needed for licensure.
I hope this article will be of help to you.
FAQs
How do I get my plumbing license in NY?
To become a Master Plumber, you must first pass a written and practical exam. You must complete the exam application (LIC41), check the box indicating that you are a Master Plumber candidate, and apply to the Department with the $525.00 fee.
What can plumbing work be done without a license in NYC?
Simple repairs or direct replacement of existing faucets or fixtures, such as toilets and sinks, are cosmetic work and do not require a licensed plumber or a permit.
Is becoming a plumber in New York worth it?
Yes. Getting paid to learn is a fantastic and uncommon opportunity. You can run your truck and set your schedule once you’ve advanced to the level of working independently.
Reference
